This travertine dome vanity light mounts hand-carved stone shades on a walnut backplate, each dome sitting on a black swivel joint that both tilts and rotates. Aim the heads at a mirror, graze them down a textured wall or turn them onto artwork; they hold position once set. The bar mounts horizontally above a mirror or vertically beside one, which makes it flexible in bathrooms, powder rooms, hallways and bedrooms alike.
Three widths are made: two heads at 12.6 inches (32 cm), three at 20.1 inches (51 cm) and four at 27.6 inches (70 cm), all projecting 6.7 inches (17 cm) from the wall. A useful rule is to pick a bar roughly three quarters the width of the mirror. Travertine is a porous natural stone, so open pores, pitting and colour banding vary from dome to dome, and that variation is characteristic of the material rather than a fault.
Each head carries a 5W integrated LED at 2700K warm white, dimmable with common dimmers, which are not included, and the module can be replaced through authorised service. It runs on AC 110-240V and is hardwired over a standard junction box, which the walnut backplate covers. Rated IP20 for indoor dry locations, it should be mounted well clear of shower and tub spray, since the stone absorbs moisture. Certified for North America, CE, SAA, SASO and KC.
- Material: natural travertine domes, walnut wood backplate, black metal joints
- Dimensions: 2-head 12.6", 3-head 20.1", 4-head 27.6" wide (32, 51, 70 cm)
- Projection: 6.7" (17 cm) from the wall
- Light source: integrated LED, 5W per head, 2700K warm white
- Voltage: AC 110-240V
- Mounting: wall, hardwired, horizontal or vertical
- Finishes: walnut backplate (natural oak on request); matte black joints (brushed brass on request)
- IP rating: IP20, indoor dry locations only
- Dimming: dimmable with common dimmers (not included)
- Service: LED module replaceable at authorised service
- Certification: North America, CE, SAA, SASO, KC
